Videotek VTM-2000 Specifications download pdf (Page 43)

VTM-200 Installation and Operation Handbook A-1

Appendix A ♦ Specifications

General

STANDARDS

Digital Inputs

 ITU-R BT.601 SMPTE 259M @ 270 Mb/s

 50 Hz and 60 Hz field rates

Analog Inputs

NTSC/PAL (auto detect or user lockable).

MONITOR REQUIREMENTS

 Non-interlaced super VGA (SVGA) multisync monitor capable of

800 x 600 and 640 x 480 displays at a vertical rate of both 50 Hz

and 59.94 Hz. (See OUTPUTS for additional requirements.)

 Composite video output for NTSC and PAL is an option.

DISPLAYS

Picture, Waveform, Vector and Audio simultaneously in a four-quadrant

display, or a full-screen display of any of these separately.

WAVEFORM DISPLAY TYPES

Digital Inputs

 Waveforms derived from digital inputs may be displayed as native

Y, C

, C

; as RGB; or as encoded composite (NTSC or PAL

dependent upon input field rate).

 The vector is displayed as component C

vs. C

, or composite R-Y

vs. B-Y.

Analog Inputs

 Waveforms derived from analog inputs may be displayed as

composite only.

 Vectors are displayed as R-Y vs. B-Y.

TIME BASE FOR SWEEPS

 1 or 2 lines; 1 or 2 fields; each sweep can be magnified x5.

 Parade and Overlay display modes for component displays are

available.

 Overlaid components are shown in a 1H display.

 Paraded components are shown in a 3H display.

DISPLAY WAVEFORM

ERROR

< 1%

WAVEFORM FREQUENCY

RESPONSE

Y (luminance) channel

± 2% to 5.0 MHz

Cb and Cr channels

± 2% to 2.5 MHz

Composite

25 Hz to 6 MHz: ± 1% of 50 kHz

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Comments to this Manuals

No comments

Videotek VTM-2000 Specifications Page 43

Comments to this Manuals

Related products and manuals for TVs & monitors Videotek VTM-2000