Videotek VTM-2000 Specifications download pdf (Page 177)

Global Setup Menu Functions

VTM Series Installation and Operation Handbook

4-49

Figure 4-8. File Navigator Screen

The left column of the File Navigator screen shows what is available to be transferred

to the USB drive. The stored presets are located in the PRESETS folder, and the frame

captures are located in the FRAME CAPTURE folder. Use the NAVIGATION

buttons to move among the folders and files. Press the ENT button to enter a folder.

When a preset or XGA capture is selected, press the ENT button to copy the file over

to the USB drive. When the ENT button is pressed, the Enter Name for Preset on USB

Drive Screen appears. Press the UP/DOWN navigation buttons to change the

character. Press the RIGHT/LEFT navigation buttons to move to the next character,

ACCEPT, or CANCEL. Once the file is renamed, select ACCEPT and press ENT to

copy the file to the USB drive. Press CANCEL to not copy the file. Pressing the EXIT

button also will not transfer the file to the USB drive.

The right column shows what is stored on the USB memory device. The stored

presets and XGA captures on the USB drive are shown in this column.

Flash from USB

NOTE: Presets are lost when performing a flash update. Ensure that the presets are saved on a USB

storage device before flashing.

NOTE 2: The menu item will not appear if a USB memory device is not installed. Disregard the

FAULT indication on the front panel during the flash update.

The FLASH FROM USB menu is used in coordination with a USB memory stick to

update the unit. Attach the USB stick into the front or back of the unit. Access the

SYSTEM\FLASH UPDATE FROM USB\PRESENT. Press the ENT button to

proceed into flash mode. Flash update status is shown with the line-by-line

programming and sector results. When complete, Flash Update Complete appears on

the screen. Cycle the power to continue normal operation.

About

The About Screen, shown in Figure 4-9, contains the model, serial number, module,

device, and version. Press the EXIT, SETUP, ENT, LEFT NAVIGATION BUTTON,

or press the LEFT/RIGHT CONTROL Knob to exit from the screen.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 239 240

No comments

Videotek VTM-2000 Specifications Page 177