Videotek VTM-2000 Specifications download pdf (Page 93)

General Operation

VTM Series Installation and Operation Handbook

3-55

• DOLBY EMB. (EMBEDDED) - Dolby Encoded audio information multiplexed

onto a serial digital data stream. (Dolby option required)

Configure the audio display type and parameters using the Audio Setup CONFIGURE

INPUT A thru D submenu. Audio can be displayed as:

• One 2 channel bar graph with 1 Lissajous and 1 Phase bar

• Two 2 channel bar graphs (for a total of 4 channels) with 2 Lissajous and 2 Phase

bars

• Three 2 channel bar graphs (for a total of 6 channels) with 3 Phase bars or

CineSound 5.1 with 2 Phase bars

• Four 2 channel bar graphs (for a total of 8 channels) with 4 Phase bars or

CineSound 5.1+AUX, 6.1, or 7.1 with up to three phase bars.

Lissajous can be selected as Soundstage or X-Y displays.

Input assignments, scaling, input levels, and response can also be modified using the

Audio Setup menu. The function of the audio is dependent upon the audio option

installed.

Audio Scales

The Vertical audio graticule scales change according to the scale selections made in the

AUDIO SETUP\METER SETUP\ANALOG or DIGITAL SCALE menu and the

format being displayed.

The Scales are:

• TYPE I

• Type IIA

• Type IIB

• Type I + 8

• Nordic

• DIN 45406

• dBFS (Digital only)

• Zero dB Ref dBFS (ref –20 dBFS) (Digital only)

• Custom dBFS (Digital only)

• Custom dB

Vertical Audio Displays

The Vertical Meter displays the level, reference, and ballistics detail in a vertical

format. There are eight analog audio input channels (four stereo pairs), 8 AES/EBU

digital input channels (eight stereo pairs), and 16 embedded audio channels

(serial-digital video input only) available for selection in the menu. A maximum of

eight channels can be displayed simultaneously. Audio inputs can be assigned to any

meter on the display.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 239 240

No comments

Videotek VTM-2000 Specifications Page 93