Videotek VTM-2000 Specifications download pdf (Page 42)

General Operation

VTM Series Installation and Operation Handbook

3-4

Table 3-1. Description of Front Panel Controls Illumination (continued)

Heading (Group) Description

MODE

 LINE: the button is high tally when Line Select mode is enabled.

 PHASE: the button is high tally when phase control mode is enabled.

 CURS: the button is high tally when cursor mode is enabled.

PRESETS

 1 – 8: the selected preset is high tally when stored or recalled except for

preset *8. A preset must contain settings in order to be selected for

recall.

 *: the button is high tally when the second bank of presets is active

(presets *1 through *8). The button is low tally for the first bank of

presets when active (presets 1 through 8). *8 is the factory default

preset.

Sleep Mode

Press and hold the ENT and DOWN NAVIGATION button to enter and exit sleep

mode. When entering sleep mode, the instrument will turn off all LEDs and the

display. The instrument is still active (i.e. alarms still triggered, etc.). When exiting

sleep mode, the instrument returns to an illuminated state.

Selecting a Pane

When multiple panes are displayed, only one pane can be selected at a time. The active

pane is highlighted with a bright colored border. Press the desired Display button to

select the active pane to be configured, as shown in Figure 3-3.

Figure 3-3. Selecting a Pane

Full-Screen Display Selection

Press the FULL button in the display group to show a full-screen view of a

selected pane. The full-screen display encompasses the entire screen. No

other pane is displayed. Press the FULL button again to return to the Quad

view.

Press the MLT button to access the multi-screen display. The Multi-Screen

Display Selection information is found on page 3-78.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 239 240

No comments

Videotek VTM-2000 Specifications Page 42