Videotek VTM-2000 Specifications download pdf (Page 26)

General Operation

VTM-2000 Installation and Operation Handbook

3-2

Table 3-1. Description of Front Panel Controls Illumination (continued)

Key Label Description

8 MAG

Press to cycle through the magnifications for the waveform display, either a

normal horizontal sweep or a sweep that has been horizontally magnified. The

magnifications are shown below:

 Component 1H Sweep magnifications: 15.0 µS, 3.0 µS, and 1.5 µS

 Component 1V Sweep magnifications:15.0 ms, 3.0 ms, 1.5 ms, and 0.6

 Composite 1H Sweep magnifications: 5.0 µS, 1.0 µS, 0.5 µS

 Composite 2H Sweep magnifications: 10.0 µS, 2.0 µS, 1.0 µS

 Composite 1V Sweep magnifications: 5.0 ms, 1.0 ms, 0.5 ms, and 0.2 ms

 Composite 2V Sweep magnifications: 10.0 ms, 2.0 ms, 1.0 ms, and 0.4 ms

9 SWEEP

Press to cycle the waveform between 1H (one horizontal line of video), 2H (two

successive lines of composite video only), 1V (one vertical field of video), or 2V

(two successive fields of composite video only).

10 GAIN

Press to cycle through the vertical gain of 1, 2.5, or 5 for the waveform and

vector display.

11 LINE SELECT

Press to cycle the line select display to ODD, EVEN, or OFF.

12 ZOOM

Press to cycle through the various zoom displays for the selected waveform or

vector pane or Audio (if installed). Zoom mode is indicated with “ZOOM” at the

top of the selected pane.

13 PHASE

(For Composite analog video only). When in Composite, the default LED is on.

Line Select will turn the LED off. Press the PHASE button to turn it back on.

Turn the CURVED ARROW knob to control the phase of the vector.

14 PRESET

Press to step through and select the four preset memories. If a preset does

not exist, the Preset is skipped. Locked presets cannot be stored until they are

unlocked.

15 UP

Press to step up through the Global Setup or pane menu.

16 SETUP/ENTER

Press to enter the Global Setup menu or a submenu when the Global Setup or

Pane menu is displayed.

17 DOWN

Press to move down through the Global Setup or Pane menu.

18 EXIT

Press to exit the submenu, Pane menu, or Global Setup menu.

19 CURVED ARROW

KNOB

 Rotate the knob to rotate the composite vector phase, or change the line

number when line select is enabled.

 Rotate the knob to move the menu (Global or Pane menu) cursor up and

down.

20 LEFT/RIGHT ARROW

KNOB

 Rotate the knob to move the waveform left and right.

 Rotate the knob to move the menu (Global or Pane menu) cursor left and

right.

21 UP/DOWN ARROW

KNOB

 Rotate the knob to move the waveform up and down.

 Rotate the knob to move the menu (Global or Pane menu) cursor up and

down.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 115 116

Comments to this Manuals

No comments

Videotek VTM-2000 Specifications Page 26

Comments to this Manuals

Related products and manuals for TVs & monitors Videotek VTM-2000