Videotek VTM-2000 Specifications download pdf (Page 74)

Global Setup Menu Functions

VTM-2000 Installation and Operation Handbook

4-18

programmable from the IP Configuration menu. The settings are performed in the IP

Configuration matrix screen.

IP Address

The IP Address is used to select a static IP address (unless Dynamic Host

Configuration Protocol (DHCP) will be used). The IP address must not be the same

address as another instrument or PC on the network. Network conflicts will occur if

two devices have the same IP address. See the System Administrator to determine a

static IP address that will avoid conflicts.

Subnet Mask

The Subnet Mask is used to configure the Subnet Mask on a network if DHCP is not

enabled. If DHCP is not used to automatically detect the Subnet Mask on a network,

the Subnet Mask must be manually configured. Unlike the IP address, the Subnet

Mask must be the same Subnet Mask as the network Subnet Mask. See the System

Administrator to determine the Subnet Mask.

Gateway

The Gateway is the network address that provides access to an outside network. Use

the Gateway submenu to configure the Gateway on a network if DHCP is not enabled.

If DHCP is not used to automatically detect the Gateway on a network, the Gateway

must be manually configured. Unlike the IP address, the Gateway must be the same

Gateway address as the network Gateway address. See the System Administrator to

determine the Gateway address.

DHCP

The Dynamic Host Configuration Protocol (DHCP) function is used to have the VTM-

2000 automatically configure an IP Address, Subnet Mask, and Gateway every time

the unit is powered on. The IP Address is dynamic and could change each time the

VTM-2000 is powered on. DHCP Enable is set to OFF by default.

GPI Output Function

The GPI Output Function submenu is used to enable the GPI OUTPUT and determine

the GPI OUTPUT POLARITY.

Alarm GPI Output

The Alarm GPI Output submenu is used to enable the GPI output to activate upon an

alarm condition.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 115 116

No comments

Videotek VTM-2000 Specifications Page 74