Troubleshooting
VTM-2000 Installation and Operation Handbook
6-3
Table 6-1. VTM-2000: Problems, Causes, and Solutions (continued)
Problem/Symptom Possible Cause Solution or Explanation
Audio level reading too low
The input reference level is not
correctly set.
Use the SETUP MENU to check
the input reference level setting.
The IP address is incorrect. Provide the correct IP address in
setup menu.
No communications on
VFlash port
Incorrect Ethernet cable. For a direct connection, use a
crossover cable. For a network
connection, use a standard
Ethernet cable.
If the problem still exists after troubleshooting the VTM-2000, see Section 1, “Service
Support,” for further instructions.
Comments to this Manuals