Videotek VTM-2000 Specifications download pdf (Page 72)

Global Setup Menu Functions

VTM-2000 Installation and Operation Handbook

4-16

with a -20 dBFS input signal, the audio output level will be +10 dBm into a 600Ω

termination. The Audio Output Level adjustment default is 0 dB.

Display Setup

The Display Setup menu is used to configure the Display colors, graticule, monitor,

and time code.

Display Colors

The display colors are used to select the colors for the background, signals, and

graticules of the VTM-2000. The colors are listed in Table 4-10 on page 4-9. The

Display Color Selection Screen, shown in Figure 4-1, is used to set the colors. Any

color selection that is not available is blocked out and not selectable. “X” indicates the

selection on the screen.

Figure 4-1. Display Color Selection

Use the NAVIGATION knobs to select the cell for the color and function. Once

selected, press the SETUP/ENTER button to assign the color to that function. Though

the same color can be used for multiple functions, each function can use only one

color. Black cells in the Display Color Screen indicate color selections that can not be

made for specific functions.

NOTE: The background color is selectable. There is a 50% reduction in the luminance level of the

background relative to the same color of other attributes (e.g. text or graticules). This is to assure a

contrast when the background color selection is the same, such as red enabled alarms over a red

background.

Graticule Intensity

The Graticule Intensity submenu is used to raise or lower the brightness of the

displayed graticule.

Monitor

The monitor menu is used to select the screen saver and output level for the monitor.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 115 116

No comments

Videotek VTM-2000 Specifications Page 72